Best Battery Relocation Kit: - Our Top Picks 2024

Rated to 500A at 12V / 300A at 24V Continuous Duty 2000A Intermittent at 12V

Mounting Bracket and Hardware Included, Mount in 96 Configurations

M10 Studs Compatible with 3/8" Wire Terminals

Heavy Duty Handle can be Held in Place with Roll Pin (Included) or #10 Machine Screw (Not Included)

Use Mounting Bracket as a Template to Mount the Switch in any Panel up to 1/2" Thick

Sealed Internals to IP66 / IEC529 Standards

Use with Fastronix 404-110 Terminal Covers for a Complete Installation

LIFE TIME assurance

Part number: PK205BBU

Fit type: Universal

REAL 1/0 American wire gauge

MADE IN USA with high quality materials and assembly

UNIVERSAL FITMENT for battery group types, 24, 27, 31, 34, 35, 51 & 78 series

DIMENSIONS OF BATTERY TRAY 13” long x 7” wide

BLACK FINISH for great looks and stealth visibility

KIT INCLUDES (1) steel battery tray, (1) steel battery hold down, (1) 20 ft. 2-gauge positive copper cable, (1) 3 ft. 2-gauge negative copper cable, (2) cable lugs, (6) cable clamps, (2) grommets, and (2) J-bolts

POWER WHERE YOU WANT IT: This product functions both as a car battery holder or battery tray for boat, and allows you to easily relocate your battery to an area with more room, or to improve weight distribution.

COMPATIBLE WITH MULTIPLE SIZED BATTERIES: This battery box kit for cars or as a marine battery tray can accommodate a battery up to 10-5/8" x 7-1/16" up to 7-1/2" high.

DEPENDABLE DURABILITY: Iron Forge Tools’ metal battery box and battery bracket is made of corrosion resistant zinc-plated steel, with a 12 gauge steel frame, and a 14 gauge steel base plate. HARDWARE INCLUDED: Includes Battery Tray, Hold-Down Angle Bar, two (3/16”) J-Bolts, two Washers, and two Locking Nuts.

EASY INSTALLATION: Installing our bolt-on battery trays are quick and easy thanks to the easy, pre-drilled holes. Mounting holes measure 12-5/8" on center from right to left sides. From top to bottom, holes measure 5" on center with 1" secondary optional holes for mounting, that measure 1" on center.

100% SATISFACTION GUARANTEED - Iron Forge Tools is a US veteran-owned business founded by a U.S. Army veteran who stands behind his products 100%. If anything goes wrong with your bolt on battery tray bracket, we will replace it with a new item.

★ Product ★ - Battery relocation kit, heavy duty remote battery terminals which extend from battery to make the battery easy to access, such as power charging, vehicle jump start, etc.

★ Mounting Bracket ★ - The battery remote terminal jumper post will come with a mounting bracket to make the mounting of the post easier, quicker and more convenient.

★ 4 Gauge Wire ★ - Each set of battery charger post will come with a set of 4 gauge wires for convenient use. The length of the cable is about 53 inches, can accept max 150A current.

★ Protect Cover ★ - Each set of car charging post will come with one red and one black protect cover, which can not only shelter the exposed contact, prevent dust and accidental contact when not use, but also make the positive and negative side easy to identify.

★ Application ★ - The battery jump post is suitable for Can Am Maverick X3, car, UTV, ATV, boat, etc.

Must-have Tool: Kemimoto UTV battery terminal relocation kit moves a set of to a more accessible area under the hood. The factory battery compartment is at the rear under the body plastics. Tools are required to remove the panel, it's dirty and hard to get a set of jumper cables to. Mount remote charging posts through a body panel for access to battery terminals and quick, easy, battery charging!

Feature: X3 battery post makes jumps and charging easy for your SxS!

Built to Last: Each car battery kit is assembled using the top quality hardware, a copper core bushing and a large brass nut to transfer maximum power. A plastic guard is included to prevent the potential of arching against important vehicle hardware. The mount is made of thick PVC plastic to be strong and lightweight with copper high quality 4 gauge wire 1.2m long.

Wide Application: The universal car charging jump post will compatible with Can Am X3 Models 2 or 4 Seats All Models, compatible with All Polaris RZR Models 2 or 4 Seats, compatible with all UTV/ ATV models, car battery jump post start also can be adapted to trucks, race car, travel trailers, tractor, mower, diesel, boat, etc.

Easy to Install: The universal car battery charger is easy to install without requiring the drilling and you can ref. to the manual to make the installation a piece of cake.

【Fitment】The battery relocation kit is compatible with 2014 2015 2016 2017 2018 2019 2020 2021 Sportsman 450 570. It is not compatible with X2 because of the bed. The 2014 models also need to be updated in location for the bracket.

【More Durable】 Use this battery accessory to better protect your vehicle. Extra protection and durability. Being tested before shipping.

【Easy to Install】The battery relocation kit is easy to install in minutes.

【Protect Battery】 Provide support for your battery. Make it last longer.

【Notice】]Please make sure whatever can be installed before you buy it. If you are not sure, please let us know your issue.

【HIGH QUALITY】With high quality copper wire is 3.95ft long has good electrical conductivity, thermal conductivity and corrosion resistance to ensure it can work for a long time

【REMOTE BATTERY TERMINAL】Each battery terminal kit is assembled using the top-quality brass terminal to transmit the maximum power. Equipped with insulation cap easy to identity and prevent crossed cables, waterproof and dust-proof, can prolong the service life

【ACCESSORIES】Our battery relocation kit feature thick PVC plastic that are more strong and lightweight, pre-drilled hole to prevent the possibility of arching against important vehicle hardware

【EASY INSTALLATION】Our X3 battery jump post kit designs small and compact and easy to install in any places where the jumper is convenient for the vehicle. It will allows you to easily charge your battery or even jump start your vehicle without removing the annoying rear seat

【APPLICATION】Compatible with Can Am X3 models 2 or 4 seats all models, all Polaris RZR models 2 or 4 Seats, all UTV/ ATV models, trucks, race car, travel trailers, tractor, mower, diesel, boat, etc.

▲ WIDE APPLICATION:The battery replacement kit can be used in a variety of applications, from street to racing, as well as custom truck or SUV applications.Equipped with battery connections, performance wire positive and negative battery cable

▲ HIGH-QUALITY:Made of high-quality aluminum material,PVC protective film coating, with corrosion resistance and durability.

▲DIMENSIONS:Outside dimensions: 13.5" W x 10"L x 10"H.3/8" - .375" Thick Hold Down (Strongest Made).Inside Dimensions 13 1/8" W x 9 1/8" L, 9 3/4" H

▲ CONVENIENT TO USE:Our aluminum battery box is a true bolt in, hassle free plug and play kit for your vehicle.Equipped with complete installation hardware, the battery can be repositioned in the trunk or bed of the truck.

▲VEHICLE COMPATIBILITY:Compatible with 1964-2009 V6 V8 GT LX GT500 Cobra Ford Mustang Steeda Roush & Saleen etc.

【High Practicality】 This fully sealed box will handle every application from street to race vehicle and custom truck or suv applications.

【Convenient To Use】Our battery box is a true bolt in, hassle free plug and play kit for your vehicle.

【Complete Accessories】Comes complete with battery connections, performance wire positive and negative battery cable

【Easy Installation】The breather fitting, breather tube, grommets and battery hold down with wing nuts for an easy install

【Strong Compatibility】Compatible with 1964-2009 V6 V8 GT LX GT500 Cobra Ford Mustang Steeda Roush & Saleen Vehicles.

MADE IN USA,LIFE TIME WARRANTY

CONVENIENT & SAFE: The UTV battery terminal relocation kit is an easy and secure way to relocate the battery terminals of your UTV. It includes all the accessories required for installation, such as a black PVC insulating bracket, two pure copper terminals, two 48.54-inch 7AWG connecting wires, and two terminal insulating rubber caps.

FASTER & RELIABLE: The 7AWG connecting wires provide faster transmission and good electrical conductivity, stability, and corrosion resistance, ensuring a reliable and long-lasting connection between the battery and the UTV's electrical system.

WATERPROOF & DUSTPROOF: The kit is designed to be durable and resistant to the elements. The IP67 waterproof standard and plastic insulated dust cap provides protection against moisture, mud, and sand, extending the service life of the kit.

EASY INSTALLATION: The small and compact design of the battery jump posts and mounting bracket makes it easy to install in any location that is convenient for the vehicle. It is a useful upgraded solution for UTV owners who want to protect their batteries from water, dirt, and other debris.

WIDE APPLICATION: Our kit is suitable for use with a wide range of motorized vehicles, including UTVs, cars, motorcycles, motorhomes, RVs, campers, boats, racing cars, travel trailers, tractors, lawnmowers, and golf carts.

REAL 2 GAUGE, MADE IN USA

【High Practicality】The battery replacement kit can be used in a variety of applications, from street to racing, as well as custom truck or SUV applications.

【Complete Accessories】:Made of high-quality aluminum material,PVC protective film coating, with corrosion resistance and durability.Comes complete with battery connections, performance wire positive and negative battery cable.

【Easy Installation】Our aluminum battery box is a true bolt in, hassle free plug and play kit for your vehicle.Equipped with complete installation hardware, the battery can be repositioned in the trunk or bed of the truck.

【Dimensions】Outside dimensions: 13.5" W x 10"L x 10"H.

【Strong Compatibility】Compatible with 1964-2009 V6 V8 GT LX GT500 Cobra Ford Mustang Steeda Roush & Saleen Vehicles.